• java_01
  • java_02
  • java_03
  • java_04
  • java_05
  • java_06
Home / Production Equipment / Punch
In order to offer better processing technology, we effectively use various punching procedure, integrate with strict production skill and QC operation, pursuing constant improvement and superior service manner, so that customers can trust us forever.

Multi-layers material rack
Short time for material exchange, suitable for medium-large sizes of materials.
Material layers and pallets can be put in for auto exchange together, the vacant pallets can be released automatically.
It is equipped with a positioning-platform which can position the material plate automatically.
It is equipped with material-separator and two detectors which can prevent two-plates punching.
Two in one material rack & straighter UL series
For slim material, one body structure, small size, not occupying too much space, suitable for thickness below 0.8mm.
Straighter motor is equipped with converter which allows easy adjustment of speed. Optional non-sectional photoelectric-arc controller allows auto-adjustment of straightening speed, so that roller's impression-trace can be eliminated.
UL (H) series for thick material is applicable, up to 6.0mm of thickness.
Robot
Wide application, like computer, TFT-LCD, electric appliances, automobiles, motorcycle, and conveyance of various plate-punching components.
Using AC servo motor to drive the two axles of conveyance and elevation with stability and precision, its conveying speed can reach up to 200 meter/minute, and conveyance distance can be adjusted depending on customer's physical requirements.
Between punching machines, additional multi-axles tapping machine or turner (both are optional) can be added to supplement the functions.
Control board is equipped with LCD HMI, which allows easy operation.
Highly-automatic production line can enhance safety, productivity, quality level, while effectively lowering defects and costs.
Optional devices: NC roller feeder, NC 3 in 1 straightening feeder, multi-layers material rack, twin-heads material rack, material-driving unit.
2〜10 punching machines can be integrated into a punching line as per physical requirement.
Multi-axles tapping machine, MTP series
Single-unit tapping, or on-line tapping are feasible.
Tapping axles or maximum tapping area can be custom-made.
Prompt adjustment of tapping location is doable simply by changing the fixture plate.
AC servo-drive can facilitate the speed and efficiency.
Punching (110 tons/single trough)
OCP series is open-mouth pattern, adopting single crank/C-shape body. Applicable for drawing, bending, engraving, impression, cutting/forging and so on, single or continuous punching are optional.

Standard features
High driving-lever, wet clutch-brake.
Rigid body.
Minimum body deformation.
Highly-sensitive overloading protector.
High-precision six-ways guider.
Top-in mould pad.
Punching machine
G2 series is with the best structure, so as to greatly promote the punching precision, enlarging its life-span. One-body structure can fully eliminate stress, therefore becomes a rigid machine.

Standard features
Rigid body.
Mid-in six-ways guider.
High driving-lever, wet clutch-brake.
Highly-sensitive overloading protector.
Multi-ranges of slider-ejectors.
Highly sensitive to deviation/overloading, to maintain precision effectively.
200 Tons Auto Punching Machine
OCP series is open-mouth pattern, adopting single crank/C-shape body. Applicable for drawing, bending, engraving, impression, cutting/forging and so on, single or continuous punching are optional.

Standard features
High driving-lever, wet clutch-brake.
Rigid body.
Minimum body deformation.
Highly-sensitive overloading protector.
High-precision six-ways guider.
Top-in mould pad.
160 Tons Auto Punching Machine
OCP series is open-mouth pattern, adopting single crank/C-shape body. Applicable for drawing, bending, engraving, impression, cutting/forging and so on, single or continuous punching are optional.

Standard features
High driving-lever, wet clutch-brake.
Rigid body.
Minimum body deformation.
Highly-sensitive overloading protector.
High-precision six-ways guider.
Top-in mould pad.
Tel:886-3-3633791 Fax:886-3-3633792 Address:No. 63, Chang’an St., Bade Dist., Taoyuan City 334, Taiwan (R.O.C.)
Copyright © TONG TSI INDUSTRIAL CO.,LTD All rights reserved      Web Design:EBM